Drain Snake,Clogged Drain Cleaning Spring(Blue)-Drain Auger Clog Remover Use For most of The Clogged

Drain Snake,Clogged Drain Cleaning Spring(Blue)-Drain Auger Clog Remover Use For most of The Clogged Sewers/Bathtub Drain/Kitchen Sink Open,Drain Clog Remover with Work Gloves and Storage Bag (35ft)

---

Feature Product

• 【Easy Storage】: Springs can be stored in drum to keep it tidy than conventional drain cleaner;
• 【Unique design】:Adjustable Thumbscrew&Anti-skid handle is very cool and more convenient & effective in removing the blockages.Add four fixed slots to the handle and make it stronger and more resistant to fall.
• 【Easy Handling】:Reinforced handle and 35ft long spring cable enough to clean short or long stoppages drains
• 【Let Me Count For You】:Pay a fee for manual dredging,and you can buy a dredger that can be use 1000 times
• 【What You Get】:Free Bonus Gloves and Storage Bag:Each of Drain snake will come with one Free Bonus Gloves,which can help you keep your hands clean and safe.The Storage Bag can help you save it better.Note:The gloves are sent in random color.

Description

Drain auger plumber snake is used to clear the toilet,floor drain,dish pool,basin,bathtub,shower room blockage,and other drains.
The snake drain contains 35feet by 1/4" (6 mm) spring that's fed out of the drum into the line,keeping it away from clean kitchen and bathroom surfaces.
Use Anti-skid handle make it more covenient and Add four fixed slots to the handle and make it stronger and more resistant to fall.

Color:blue
Spring-Steel Length:35ft
Grip handle:ABS Pistol
Cable material:Steel wire
Package:1 x Snake Pipe Cleaner
1 x Glove Note:The gloves are sent in random color.

Operation Guidelines
1.Hold the wire and loosen the screw to allow the wire to be pulled out of the housing
2. Pull the wire out and push it into the pipeline
3. If you can't get the wire into the pipeline or get to a blockage in the pipe,then tighten the screw and press the handle and wire toward the pipeline
while turning the hand crank clockwise to break up the blockage and until the wire continues into the pipeline.
You can fill the pipeline with some water to help remove the blockage,but only if there is still some movement in the drain.
If all goes well, the blockage will be washed away and the pipeline will be unplugged.
4. Once the wire is able to continue to be moved into the pipeline, then you can then loosen the screw and continue to repeat the above steps1-4 until the wire gets through all the blockages
5. When you have successfully removed the blockage in the pipeline, you can pull the wire out and clean it thoroughly with water.
After the wire is dry, you can coat the wire with oil before pulling the wire into the housing to help keep it from rusting.

Note:
1.During use,don't use excessive force
2.When releasing the screw that locks the wire in place, be careful of the wire as the wire was rotated.

---