Wednesday, September 11, 2019

Fosmon C-10683 Wireless Remote Control Outdoor Electrical Outlet Switch Weatherproof Heavy Duty 3-Prong

Fosmon C-10683 Wireless Remote Control Outdoor Electrical Outlet Switch Weatherproof Heavy Duty 3-Prong Plug-in ETL Listed (Battery Included), 1 PACK

Fosmon C-10683 Wireless Remote Control Outdoor Electrical Outlet Switch Weatherproof Heavy Duty 3-Prong Plug-in ETL Listed (Battery Included), 1 PACK

I have a shop vacuum that is placed overhead and out of reach that I have plugged into this device. Works as it should.

For those who didn't get instructions included, or think this is plug and play/use, you actually have to "pair" the remote with the main unit that plugs into the wall outlet.

1) Remove protective film from remote battery compartment (mine tore when pulling the external tab without removing battery cover)
2) Press remote button - should see red light appear on remote (now you know you actually removed ALL the protective film around battery)
3) Plug main unit into wall (red LED on unit will flash for 30 seconds) That is your window of time to press the remote button to then "pair" the two at which point the flashing LED on the main unit should stop.

Was a bit tricky to set up for a novice like me but basically this is how it goes, just turn the battery switch to open and lift off to remove the plastic tag, (the plastic tag is not visible you need to lift off the battery cap to remove it) Then plug the unit into the plug outlet, while it is still blinking press down on the on button on the remote control and then it will be synced. I initially waited for the blinking to stop and it was not syncing, so do it while its blinking. Press the on button for off and I find keeping ones finger pressed down for a couple of seconds turns it on again. Overall very pleased with the product and happy I can leave it outside in all weathers for my outside lighting.

Works great when it works. Strange, after about a week it started only working intermittently. If I give it a slap, it works again but only for one or two button presses. Not sure if there's a loose wire or bad battery contacts. Going to replace the battery and see if that fixes it.

Update May 31, 2018:
Since I cleaned the battery contacts, it has been working flawlessly. If you buy this, remove the battery and lightly clean the contacts with an emery board. Then it will work like a charm.

I purchased this switch to operate a shop vac that I use for dust collection in my shop. There are switches that are purpose-made for this but cost three to five times as much and don't have higher amperage ratings so this seemed like a good deal.

It arrived quickly and I set it up according to the directions but the switch wouldn't operate. I removed and cleaned the battery and still no joy. I checked my stock of batteries and found I had one that matched, CR-2023 if I recall correctly. I put in my battery and followed the directions again, plug in the wall unit and while the LED is flashing press the button on the remote to pair the devices. This time it worked perfectly.

So I now have a working remote for my dust collection system. I would give it five stars if it came with a good battery. That seems to be a common issue with this unit.

Wireless Remote Control Outlet, Fosmon Outdoor works really great even from inside my home to my shed about 70 feet. I use it on my Flowtron BK-40D Electronic Insect Killer, 1 Acre Coverage to turn it on at dust & off at dawn. I tried to see if it would work in the kitchen in the front on my house & in the hall way through two walls & found it would work through two walls plus through the Shed wall. My wireless control is also inside my shed with the electric wire is running through a hole in the shed to the Flowtron BK-40D Electronic Insect Killer hanging outside my shed ,My Woods on/off would not even work very good standing on the back patio facing the shed. I could not believe how great it works at great distances. I am very please and would recommend this product to anyone looking for a reliable long distance remote control..


Get it Now

Feature Product

  • [GREAT FOR LIGHTING] Remotely turn your indoor and outdoor lighting ON/OFF
  • [CONVENIENT] Conveniently turn your outside lights on from indoors or turn hard to reach places on with a click of a remote.
  • [WEATHER RESISTANT] Durable, weather resistant construction for outdoor use
  • [MULTIPLE USES] TV's, lighting, heaters, sprinkler systems, terrariums, aquariums, humidifiers
  • [LIMITED LIFETIME ] Includes a Limited Lifetime

Description

Convenient and Great for Lighting Remotely turn your indoor and outdoor lighting ON/OFF anytime with Fosmon's wireless remote control outlet. It is ideal for seasonal lights and lamps. Conveniently turn your outside lights on from indoors or in your car with its 30 meter (98 foot) range. Overcome Hard to Reach Outlets Great for turning devices ON/OFF in hard to reach places. Perfect for the elderly and those with limited mobility and back pain. Grounded and Weather Resistant Durable, weather resistant construction for outdoor applications with a grounded 3 prong AC plug that plugs into any standard outlet. Compact Remote Fits comfortably in your pocket, purse, and glove box or on your key chain. Multiple Uses Great for TVs, lighting, heaters, sprinkler systems, terrariums, aquariums, humidifiers, and more. Simple Simplistic design with an ON/OFF button for ease of use. Quick installation with no additional tools needed. Limited Lifetime This Fosmon product includes a limited lifetime . Please visit Fosmon's website for more details. Please note: If using outdoors, be sure to plug into GFCI approved outlet, and hang with outlet hanging down. This will prevent moisture from penetrating into the plug. Multiple plug in outlets (receiver) can be paired to one remote but multiple remotes cannot be paired to one outlet. Specifications: -Max Range in Open Area - 30 meters / 98. 4ft -Includes CR2032 Battery for RF Remote -For Outdoor and Indoor Use -Single 125VAC outlet - 15A Max -125VAC, 60HZ, 15A, Resistive -125VAC, 60HZ, 15A, General purpose -125VAC, 60HZ, 10A / 1250W, Tungsten-125VAC, 60HZ, 3/4HP TV-5-Fixed Transmitter and Receiver Code-Frequency: 433. 92MHz -ETL Listed Package Includes Outlet Receiver x1Outlet Remote x1



 This remote control starter works flawlessly with my 2HP harbor freight dust collector. My shop is 25x25 and the remote works anywhere I stand This remote is plugged directly into my wall outlet. All you have to do is inbox it, plug in the outlet into the item your using it for (in my case my dust collector) then it is ready for use. I put It on a lanyard to make it easier to hold onto and find.

Wow! This device is great.

Set up as a switch for a wall Air Conditioner which is very high, such that I cannot reach the power switch to turn it on or off, every "solution" to this problem that I tried up, until I tried this one, turned out to be some sort of switch that heated up --- and became very hot. Apparently, they could not handle the amperage.

This switch remains cool. I suspect that the air conditioner pulls approximately 15 amps. This one handles the 15 amps with ease.

Additionally, I've had no problem with the remote control not working. This remote switch is highly recommended. If I could give it more than 5 stars, I would.

Works great. I have bought a couple of these. I use one for my shop vac and another for my HVLP paint sprayer. I was a bit worried that these might be a problem since they have a pretty high inrush current when starting up, but no issues.

The only thing to note is that you have to "pair" the wireless remote with the unit the first time. It really is no big deal and very simple you only do it once, but it required I actually read the instructions, lol. At first I wondered why it didn't come pre-paired, then I realized if you might have more than one of these.

I am using this to turn my Harbor Freight 2 HP dust collector On/Off. I have only had it 1 month now so time will tell how long it will last. I know that it is not rated for the current draw of the 2HP HF motor but for $13 dollars if it fails I will buy another one and pair it with a Contactor that is rated for a higher current. What I will say is the design of this being a single button makes it perfect for easy use. I place it on a carabiner and hook it onto my belt loop while I’m working. All I have to do is reach down and tap it to turn the dust collection on and reach back down and tap it again to turn it off. The size of the button makes this perfect because you done have to feel around for which button is on or off.

We have an elderly cat that starting peeing in the house, so she has been an outside cat since the springtime. Now that it is winter, we bought her a heated cat habitat where she can warm up between her trips to monitor her territory. (We bring her inside after dark to a large multilevel cat playpen ) This remote control is a big help because we can turn the heat off or on remotely and don't need to freeze outselves when plugging or unplugging the heater. There is a handy red light that indicated whether the power is on or off. Great product.

Get it Now

0 comments:

Post a Comment